32
This label also indicates the number of safety seat
belts that have been installed at the factory. Addi-
tions or other changes made to the motorhome after
it left the factory will aect (reduce) the OCCC.
The lower portion of the label is provided voluntari-
ly and indicates the weight value of the motorhome
as it was manufactured and weighed before leaving
the factory. This label also indicates the GCWR of
the completed motorhome.
is required by
the government to verify the RV complies with all
motor vehicle standards for Canada and the Unit-
ed States. It includes the following information:
Manufacturer name, VIN, GVWR, GAWR (front/
rear), tire and rim sizes and cold tire ination pres-
sures.
is lo-
cated on the rear bumper above the hitch receiver.
Be sure to read and follow the guidelines and informa-
tion stated on this label. Refer to the Chassis Guide for
additional information.
Consult a hitch specialist or your dealer for assistance when pre-
paring your motorhome for towing a vehicle or trailer.
To Next Page
Loading...
