6
2. Using your digital camera
2.1 Battery loading
Open the battery compartment located at the back of the appliance and place three
1.5V AAA type alkaline batteries in it, inserting them in the direction shown on the
diagram at the bottom of the compartment. Close the compartment and press the
MODE button. The number 18 will appear on the LCD screen of the camera. This
indicates that it is ready to take 18 "high-resolution" photographs and that its
memory is empty.
When the symbols blink on the LCD screen, which indicates low battery power, it is
time to change the batteries.
Warning: please transfer those captured photos to your computer via USB cable
before changing battery to save photos, or else, the photos captured will lose.
Important: we strongly recommend that you do not use rechargeable batteries in
order to not reduce the performance of your camera.
2.2 Changing function modes
The LCD screen displays different symbols when the MODE button is
pressed. The meanings are as follows:
To Next Page
Loading...
Need help?
General
