Change to
compressed mode
Hi-resolution
photo mode
Continuous
shooting
Change to Low -
resolution
Change to 60 Hz
anti-flicker mode
Change to normal
mode
Change to 50 Hz
anti-flicker mode
Delete all photos
Delete last photo
AVI Capture
Sleep mode
Timer mode
2.3 Taking photos
This is the mode by default when the camera is turned on. By pressing the
shutter button, a distinct beep can be heard. The photo has been taken.
Automatically the number displayed on the LCD screen is reduced. If the
brightness is too low, 2 quick beeps are heard indicating that the photo
cannot be taken.
WARNING: when light is low the camera needs more time to automatically
adjust exposure and gain. The beep, indicating that the photo has been taken,
therefore goes off after a certain time has elapsed. Make sure you do not
move the camera during this time lapse.
To Next Page
Loading...
Need help?
General
