To Next PageTo Next Page
Need help?Do you have a question about the JB INDUSTRIES Supernova and is the answer not in the manual?
General| Brand | JB INDUSTRIES |
|---|---|
| Model | Supernova |
| Category | Measuring Instruments |
| Language | English |
Summary of essential button functions for operating the DV-40 gauge.
Lists user-configurable settings retrieved upon power-up, such as units and alarm limits.
Instructions for cleaning the vacuum sensor using isopropyl alcohol.
Describes the DV-40's initial startup sequence, warm-up state, and sensor connection checks.
Explains visual indicators for battery status and voltage levels, including low battery warnings.
Details how the alarm system operates, covering low and high limit alarm activation.
Explains how to navigate the user settings menu using the MODE, UP, DOWN, and POWER keys.
Procedure for selecting and storing preferred measurement units (e.g., Microns, Pascals).
How to set the pressure level for the high limit alarm activation.
How to set the pressure level for the low limit alarm activation.
Configures the duration the backlight remains active after the last key press.
Enables or disables audible feedback (beeps) for button presses.
Sets whether pressure is displayed in high resolution or rounded off.
Configures the period of inactivity after which the unit automatically shuts down.
Displays firmware release versions for primary and sensor CPUs for identification.
Notes that calibration is factory-recommended and requires matching serial numbers.
