To Next PageTo Next Page
Need help?Do you have a question about the JBL 4312G and is the answer not in the manual?
General| Type | 3-way Studio Monitor |
|---|---|
| Impedance | 6 Ohms |
| Crossover Frequencies | 640 Hz, 5 kHz |
| Frequency Response | 40Hz - 40kHz |
| Sensitivity | 90 dB |
| Woofer | 12-inch (300mm) |
| Midrange | 5-inch Polymer-coated Pure Pulp Cone |
| Tweeter | 1-inch (25mm) |
| Dimensions | 597 x 362 x 299 mm (23.5 x 14.25 x 11.75 inches) |
| Low-Frequency Transducer | 12-inch (300mm) |
| Mid-Frequency Transducer | JM125PC-8 |
| High-Frequency Transducer | 054ALMg-1 |
| Enclosure Type | Bass-reflex |
| Weight | 25.4 kg (56 lbs) |
| Controls | High Frequency and Mid Frequency Level Adjustment |
Details the items included in the packaging, consisting of mirror-image matched pairs of loudspeakers.
Provides essential guidance for optimal speaker placement, considering room acoustics and listening position for best sound.
Guidance on orienting mirror-image speakers for optimal stereo imaging based on room dimensions and listener position.
Instructions for establishing a fundamental connection between the amplifier and speaker for optimal performance.
Details on using bare wire, pin, spade, and banana connectors for secure and proper audio hookups.
Recommendations for cleaning and maintaining the speaker cabinet, grilles, and driver cones to preserve finish and function.
