JBL 4365 - User Manual

OWNER’S MANUAL
JBL
®
STUDIO MONITOR
MODEL 4365
3-way loudspeaker
4365 4365
0219CSK - JBL Studio Monitor Model 4365 OM v1.indd 1 17/06/10 10:23:46

Summary

Introduction

Unpacking the Speaker

Changing the Speakers Feet

Placement

Connections

Basic Single-Wire Connection

Connects the amplifier to each speaker using a single wire.

Using Bare Wire or Pin Connectors

How to connect bare wire or pin connectors to the speaker terminals.

Using Spade Connectors

How to connect spade connectors to the speaker terminals.

Using Banana Connectors

How to connect banana connectors to the speaker terminals.

Bi-Wire Connection

How to bi-wire the speakers using jumper wire removal.

Controls and Adjustments

High-Frequency Trim

Adjusts the high-frequency range balance of the speaker.

Ultrahigh-Frequency Trim

Adjusts the ultrahigh-frequency range balance of the speaker.

Caring for Your Speakers

Specifications

JBL 4365 Specifications

General

Nominal Impedance	8 Ohms
Frequency Response	30Hz - 40kHz
Recommended Amplifier Power	300 Watts
Woofer	15" (380 mm)
Tweeter	1" (25 mm)
Crossover Frequencies	800Hz