JBL 4367 User Manual

OWNER’S MANUAL
JBL
®
4367
15-inch (380 mm) 2-way floorstanding loudspeaker

JBL 4367 Specifications

General

Frequency Response	30Hz - 40kHz (-6dB)
Sensitivity	94dB (2.83V/1m)
Impedance	6 Ohms
Crossover Frequencies	700Hz
Weight	130 lb (59 kg)
Low-Frequency Transducer	15-inch (380mm) woofer
Enclosure Type	Bass-reflex
Input Connectors	Dual binding posts
Power Handling	300 Watts RMS

Summary

INTRODUCTION

THANK YOU

Expresses gratitude for purchase and highlights JBL's audio legacy.

PACKAGE CONTENTS

Lists all items included in each JBL 4367 box for verification.

INSTALLING THE SPEAKER'S FEET

PLACEMENT

NOTES ABOUT SPEAKER PLACEMENT

Offers critical advice on speaker placement, avoiding heat, humidity, and direct sunlight.

CONNECTIONS

BASIC SINGLE-WIRE CONNECTION

Explains connecting speakers to an amplifier using single-wire connections, emphasizing correct polarity.

Using Bare Wire or Pin Connectors

Details using bare wire or pin connectors with speaker terminals for audio connections.

BI-WIRE CONNECTION

Using Spade Connectors

Describes using spade connectors with speaker terminals for bi-wiring.

Using Banana Connectors

Explains connecting banana connectors to speaker terminals for bi-wiring.

CONTROLS/ADJUSTMENTS

CARING FOR YOUR SPEAKERS

SPECIFICATIONS