JBL AM5212/95-WH - User Manual

JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
JBL AM5212/95-WH
REV C
PACKAGE
WIRING DIAGRAM
01-10
Technical Manual
JBL AM5212/95-WH
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance: 8 Ohms
• Transducer Power LF: 400W (1600W peak), 2 hrs
Rating (AES): 300W (1200W peak), 100 hrs
HF: 40W (160W peak), 2 hrs
• Long-Term Power Passive mode: 300W (1200W peak),
Rating (IEC): 100 hrs
• Frequency Response: 43 Hz - 18 kHz (±3 dB)
• Frequency Range: 37 Hz - 20 kHz (-10 dB)
• Maximum SPL:
Bi-amp mode: LF: 122 dB-SPL cont avg (128 dB peak)
HF: 129 dB-SPL cont avg (135 dB peak)
Passive mode: 121 dB-SPL cont avg (127 dB peak)
• System Sensitivity: Passive mode: 96 dB SPL
1 watt @ 1 meter
• Crossover Frequency: 1.4 kHz
SYSTEM COMPONENTS:
• Cabinet: Enclosure (Not For Sale)
• Grille: 338163-007, 338163-107 (WH)
SYSTEM COMPONENTS: (CONT’D)
• Low Frequency 262H-1, 300 mm (12 in) driver
Transducer: with 50.8 mm (2 in) dual voice coil
• DC Resistance: 5.5 ohm +/- 10%
• High Frequency 2408H-1, 38 mm (1.5 in) exit
Transducer: compression driver, 38 mm (1.5 in)
voice coil
• DC Resistance: 4.80 ohm +/- 0.2 ohm
• Crossover Network: 443748-001
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 7.0V Input,10 Hz to 10 kHz
B. L.F. Aural Sweep Test: 7.0V Input,10 Hz to 1 kHz
C. H.F. Aural Sweep Test: 0.75V Input, 200 Hz to 1.5 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 713 x 371 x 458 mm D
(28.06 x 14.6 x 18.1in.D.)
• Net Weight: 45 lb (20.2 kg.)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
YEL/BLK
GRN/BLK
GRN
YEL
Network Assembly
443748-001
Driver, Low Freq.
262H-1
(363916-003X)
Cone Repl
C8R262
Driver, High Freq
2408H-1
(365011-001X)
Diaph Repl
D8R2408-1
SEE NETWORK SCHEMATIC PAGE
Carton
352188-001
Filler (2)
352187-001
PKG,Microfoam (4)
49790P
20” x 18” Sheets
Warranty
59660
Installation Sheet
339390-064
Sticker, Logo
339397-001
Bag
21784
NOTE: INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.
A COMPLETE REPLACEMENT ASSEMBLY SHOULD BE ORDERED.

Summary

JBL AM5212;95-WH Specifications

Acoustic and Electrical Specifications

Details nominal impedance, power ratings, frequency response, SPL, and sensitivity.

System Components

Lists low and high frequency transducers, DC resistance, and crossover network details.

Aural Sweep Test Specifications

Specifies test conditions for system, LF, and HF aural sweep tests.

Physical Specifications

Provides enclosure dimensions and net weight details.

JBL AM5212;95-WH Package Contents

Package Components

Lists the parts included in the product package, such as cabinet, grille, and accessories.

JBL AM5212;95-WH Wiring Diagram

Wiring Diagram Overview

Illustrates the internal wiring connections for the speaker system and its components.

JBL AM5212;95-WH Schematic Details

PCB Assembly Schematic

Detailed schematic of the PCB assembly with component values and connections.

Connector Pinout

Shows the pin configuration for the 8-pin Molex connector and associated wiring.

JBL AM5212;95-WH Component Exploded View

Component Identification

Provides an exploded view identifying all individual parts of the speaker system.

Part Number Cross-Reference

Lists part numbers for drivers, network assembly, mounting hardware, and enclosure.

JBL AM5212/95-WH Specifications

General

Brand	JBL
Model	AM5212/95-WH
Category	Speakers
Language	English