JBL AWC82/-BK - User Manual

To Next Page

JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.

JBL AWC82/-BK

REV A

PACKAGE

WIRING DIAGRAM

11-12

Technical Manual

JBL AWC82/-BK

SPECIFICATIONS

ACOUSTIC & ELECTRICAL SPECIFICATIONS:

• Nominal Impediance: 8 Ohms

• Long-Term System Power

Rating: 250W, 2 hrs

200W, 100 hrs

• Frequency Response (±3 dB):100 Hz - 20 kHz

• Frequency Range (-10 dB): 80 Hz - 20 kHz

• Maximum SPL: Direct 8 ohm:118 dB (peaks of 124 dB)

200W Tap: 117 dB

• System Sensitivity: 94 dB, (Ave 100 Hz - 20 kHz)

2.83V @ 1 Meter

• Crossover Frequency: 1.8 kHz, 3rd order (18 dB/oct) high-

pass plus conjugate to HF, 2nd order

low-pass to LF

SYSTEM COMPONENTS:

• Cabinet: Enclosure (Not for Sale)

• Grille: 5026574, 5026687 (BK)

• Low Frequency Driver: Kevlar-reinforced cone with weather

treatment, 50 mm (2 in) voice coil

• DC Resistance: 5.2 ohm

SYSTEM COMPONENTS:

(CONT’D)

• High Frequency 25 mm (1 in) diaphragm and voice coil

Transducer diameter, high temperature polymer

patented design, fluid-cooling

• DC Resistance: 3.6 ohm +/- 0.2 ohm

• Network Assembly: 5026640

AURAL SWEEP TEST SPECIFICATIONS:

A. System Aural Sweep Test: 7V Input, 50 Hz to 20 kHz

B. L.F. Aural Sweep Test: 10V Input, 20 Hz to 1 kHz

C. H.F. Aural Sweep Test: 2V Input, 2 kHz to 16 kHz

PHYSICAL SPECIFICATIONS:

• Enclosure Dimensions: 300 x 300 x 305 mm D

(11.8 x 11.8 x 12.0 in.D.)

• Net Weight: 21.5 lb (9.8 kg.)

WARRANTY INFORMATION:

• Refer to Warranty Statement packed with each product.

NOTE: INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.

A COMPLETE REPLACEMENT ASSEMBLY SHOULD BE ORDERED.

SEE NETWORK SCHEMATIC (5026640) PAGE 2

Woofer

5026643

H/F Driver

2414H-C

(5000169X)

Network

Assembly

5026640

Cardboard

5026658

Top, Styrofoam

5026661

Bottom,Styrofoam

5026664

Master Carton

5026586

5026699 (BK)

Serial Number

Corner Label for

Carton

5026590

5026702 (BK)

Model Label

5026580

5026693 (BK)

Serial Number

Label

5026583

5026696 (BK)

U-Bracket

5026577

5026690 (BK)

Warranty 59660

Transformer Taps: 70V: 200W, 100W, 50W, 25W

100V: 200W, 100W, 50W

.187

YEL

.250

YEL/BLK

.250

GRN

.187

GRN/BLK

Gland Nut

5026625

Terminal

Compartment

Cover

5026676

5026753 (BK)

Screw Bag

5026679

5026756 (BK)

OM Bag

5026655

Tap Switch

Label

5026628

Need help?

Do you have a question about the JBL AWC82/-BK and is the answer not in the manual?

Summary

Speaker Specifications

Acoustic and Electrical Specifications

Details nominal impedance, power rating, frequency response, maximum SPL, system sensitivity, and crossover frequency.

System Components

Lists main components including cabinet, grille, low frequency driver, high frequency transducer, DC resistance, and network assembly.

Aural Sweep Test Specifications

Specifies voltage and frequency ranges for system, LF, and HF driver aural sweep tests.

Physical Specifications

Provides enclosure dimensions and net weight for the speaker system.

Warranty Information

Refers to the warranty statement included with the product.

Package Contents Overview

Wiring and Transformer Information

Network Assembly Schematic

Component Exploded View