Do you have a question about the JBL Balboa 10 and is the answer not in the manual?
maximum recommended amplifier power | 125W |
---|---|
power handling (continuous/peak) | 60W/240W |
nominal impedance | 8 Ohms |
sensitivity (2.83V/1m) | 86dB |
---|---|
frequency response (-3dB) | 68Hz – 20kHz |
crossover frequency | 3000Hz |
high-frequency transducer | 19mm (3/4") Titanium-laminate dome |
---|---|
low-frequency transducer | 130mm (5") Pure-cellulose fiber cone, shielded |
baffle | Low diffraction, IsoPower[™] |
dimensions (H x W x D) | 259mm x 165mm x 210mm |
---|---|
weight per speaker | 3.9kg |
port | FreeFlow[™] flared |
maximum recommended amplifier power | 150W |
---|---|
power handling (continuous/peak) | 80W/320W |
nominal impedance | 8 Ohms |
sensitivity (2.83V/1m) | 90dB |
---|---|
frequency response (-3dB) | 47Hz – 20kHz |
crossover frequencies | 600Hz, 3500Hz |
high-frequency transducer | 19mm (3/4") Titanium-laminate dome |
---|---|
midrange transducer | 100mm (4") Pure-cellulose-fiber cone, shielded |
low-frequency transducer | 170mm (6") Pure-cellulose-fiber cone, shielded |
dimensions (H x W x D) | 889mm x 229mm x 321mm |
---|---|
weight per speaker | 14.5kg |
port | FreeFlow[™] flared |
maximum recommended amplifier power | 150W |
---|---|
power handling (continuous/peak) | 75W/300W |
nominal impedance | 8 Ohms |
sensitivity (2.83V/1m) | 90dB |
---|---|
frequency response (-3dB) | 80Hz – 20kHz |
crossover frequency | 3500Hz |
high-frequency transducer | 19mm (3/4") Titanium-laminate dome, shielded |
---|---|
low-frequency transducer | Dual 130mm (5") Pure-cellulose fiber cone, shielded |
baffle | Low diffraction, IsoPower[™] |
dimensions (H x W x D) | 170mm x 479mm x 260mm |
---|---|
weight per speaker | 6.9kg |
port | FreeFlow[™] flared |
Recommendations for optimal placement of the Balboa 30 speaker, including angles.
Guidance on positioning Balboa 10 speakers as front and surround speakers.
Optimal placement for the Balboa Center speaker for immersive audio.
Instructions for applying protective feet and nonskid pads to speakers for different surfaces.
Proper connection of speaker wires to terminals, emphasizing polarity for sound quality.
Steps to resolve no sound issues from any speaker, checking connections, wires, and settings.
Troubleshooting low bass, system shutdown at volume, and single speaker problems.
Resolving lack of sound from surround speakers, checking settings and source material.
Detailed technical specifications for the Balboa 10 model.
Detailed technical specifications for the Balboa 30 model.
Detailed technical specifications for the Balboa Center model.