JBL BAR 2.1 User Manual

Connect a digital device such as a set-top box, DVD/Blu-ray player, or games console to your soundbar
through a single HDMI connection. When you connect the devices in this way and play a file or game,
the
video is automatically displayed on your TV, and
audio is automatically played on your soundbar.
1. Using a High Speed HDMI cable, connect the HDMI OUT connector on your digital device to the
HDMI IN on your soundbar. Connect your soundbar to TV through HDMI OUT (ARC).
2. Press repeatedly SOURCE button on the remote control until HDMI 1 is displayed on the display
panel.
3. If the TV is not HDMI CEC compliant, select the correct video input on your TV.
4. On the connected device, turn on HDMI CEC operations. For details, see the user manual of the
device.
Option 2: Connect devices through analog audio cables
1. Using an analog cable, connect the AUX IN (3.5mm jack) on your soundbar to the AUX OUT /
3.5mm connectors on your portable devices.
2. Press repeatedly SOURCE button on the remote control until AUX is displayed on the display
panel.
Power on your system

JBL BAR 2.1 Specifications

General

Audio decoders	-
RMS rated power	300 W
Audio output channels	2.1 channels
Number of tweeter drivers	2
Signal-to-Noise Ratio (SNR)	99 dB
Tweeter diameter (imperial)	1.25 \
Bluetooth	Yes
HDMI version	1.4
Bluetooth version	4.2
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Product color	Black
Apple docking compatibility	Not supported
Receiver included	No
Subwoofer type	Active subwoofer

Weight and Dimensions

Depth	58 mm
Width	965 mm
Height	68 mm
Soundbar weight	1900 g
Subwoofer width	225 mm
Subwoofer height	370 mm
Subwoofer weight	5200 g