JBL BAR 2.1 User Manual

Pair with the subwoofer
The wireless subwoofer automatically connects with the soundbar when both units are powered on. If
the subwoofer is on and connected, the LED lights white continuously.
If no audio from the wireless subwoofer can be heard, manually pair the subwoofer:
1. Turn on the soundbar and the subwoofer. If the connection is lost, the LED indicator on the
subwoofer blinks slowly.
2. Press the CONNECT button on the subwoofer to enter pairing mode. The LED indicator on the
subwoofer blinks quickly.
3. Press and hold DIM DISPLAY button on remote control for 5 seconds, followed by short press on
BASS+, and BASSbutton in sequence. Panel display will show “PAIRING”If the pairing succeeds,
the LED indicator on the subwoofer lights up and the soundbar display will show “DONE”.
If the pairing fails, the indicator on the subwoofer blinks slowly.
4. If the pairing fails, repeat the steps above.
4. PLACE YOUR SOUNDBAR
4a. Place the Soundbar on the table

JBL BAR 2.1 Specifications

General

Audio decoders	-
RMS rated power	300 W
Audio output channels	2.1 channels
Number of tweeter drivers	2
Signal-to-Noise Ratio (SNR)	99 dB
Tweeter diameter (imperial)	1.25 \
Bluetooth	Yes
HDMI version	1.4
Bluetooth version	4.2
Connectivity technology	Wired & Wireless
Digital audio optical in	1
Product color	Black
Apple docking compatibility	Not supported
Receiver included	No
Subwoofer type	Active subwoofer

Weight and Dimensions

Depth	58 mm
Width	965 mm
Height	68 mm
Soundbar weight	1900 g
Subwoofer width	225 mm
Subwoofer height	370 mm
Subwoofer weight	5200 g