Need help?Do you have a question about the JBL CBT Series and is the answer not in the manual?
Connect amplifier wiring and securely attach the wall bracket to the wall using appropriate anchors.
Emphasizes that installation must be done by qualified persons using safe rigging standards.
Mount the speaker bracket to the CBT 70J using M6 hardware, ensuring the hook feature is downward.
Mount coupler plate and speaker bracket for vertical CBT 70J/70JE arrays using specified bolts.
Slide the speaker bracket onto the wall bracket, engaging the hook slot onto the pivot bolt.
Secure the speaker on the pivot bolt and insert the M6 60mm bolt to set the angle.
Use through holes for 5° increments or a slot for continuous +/-15° adjustment.
Tighten both bolts with provided hardware to lock the chosen angle setting.
Attach a safety cable using an M6 bolt to the speaker cabinet and a secondary wall point.
Provides dimensions for the loudspeaker-mount section of the CBT 70J bracket.
Shows dimensions for the assembled bracket, wall-mount section, and tilt adjustment features.
Displays overall dimensions and key measurements of the coupler plate.
Illustrates connection points and threaded hole specifications for various mounting systems.
General| Frequency Response | Varies by model |
|---|---|
| Power Handling | Varies by model |
| Impedance | Varies by model |
| Sensitivity | Varies by model |
| Weight | Varies by model |
| Dimensions | Varies by model |
| Type | Column |
| Mounting Options | Wall |
| Coverage Pattern | Variable |
To Next Page
