Need help?Do you have a question about the JBL Control 25AV-LS and is the answer not in the manual?
Audio Specifications| frequency range (-10 dB) | 70 Hz – 23 kHz |
|---|---|
| frequency response (±3 dB) | 130 Hz – 14 kHz |
| coverage pattern | 110º x 85º |
| sensitivity (2.83V@ 1m) | 87 dB |
| nominal impedance | 8 ohms |
| directivity factor (Q) | 4.9 |
| directivity index (DI) | 6.9 db |
Power| long-term system power rating, IEC | 200 W Continuous Program Power |
|---|---|
| long-term system power rating, IEC (pink noise) | 100 W Continuous Pink Noise |
| transformer taps | 100V: 60W, 30W & 15W (plus 7.5W at 70V) |
Physical Specifications| dimensions | 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in) |
|---|---|
| net weight | 4.0 kg (9 lbs) |
| transducers | 130mm (5.25 in) polypropylene-coated paper, 25mm (1 in) voicecoil, 20mm (.75 in) titanium coated PEI |
UL 1480 UUMW listed for fire alarm and emergency communication systems.
Top-quality transformer for 70V/100V lines with 8 ohm bypass.
Exclusive overload protection is virtually inaudible, ensuring reliability.
Troubleshooting steps for when no sound is produced by the speakers.
Troubleshooting steps for when only one speaker is not producing sound.
UL-1480 UUMW listed for use with non-DC supervised systems and junction boxes.
General Purpose Use Listed UL-1480, Category UEAY for broader applications.
Complies with NFPA 70/72 for Class 1-3 wiring with non-DC supervised systems.
Complies with NFPA 70/72 for fire alarm wiring with non-DC supervised systems.
Specifies enclosure material (High Impact Polystyrene) and safety listing (UL-1480 UUMW).
To Next Page