Control
®
25
Compact
Indoor/Outdoor
Background/Foreground Speaker
Key Features:
Components: 5¼” Polypropylene
coated woofer, ¾” Titanium coated
horn loaded tweeter.
Built-in InvisiBall
®
mounting
hardware
Weather resistant enclosure and
transducers
Readily paintable
90° x 90° high frequency horn
Overload Protection Circuitry
Sensitivity: 88 dB SPL, 1W, 1m
The Control 25 is perhaps the most
versatile of JBL Professional’s Control
Contractor Series indoor/outdoor
loudspeakers. Its robust nature makes
the Control 25 a perfect choice for
restaurants, health clubs, outdoor
theme and water parks or other
applications where foreground/back-
ground music and paging are
required.
The unique InvisiBall
®
mounting
hardware is included in each system
and makes short work of permanent
installation. The InvisiBall mounting
method adds the benefit of vertical
rotation of up to 37° off-axis and hor-
izontal rotation of up to 44° off-axis.
Because InvisiBall adjustments are
made through a hidden access
behind the logo badge, the grill
never needs to be removed and there
exists a high degree of theft deter-
rence as well.
The Control 25 readily accepts a
variety of paints and finishes to
match any decor.
Weather resistance is maximized by
coating the woofer cone in
polypropylene and terminating its cir-
cumference in JBL’s WeatherEdge™, a
seamless, rubberized extension of the
woofer surround that provides added
protection to critical transducer ele-
ments. The polycarbonate tweeter
diaphragm is reinforced with a thin
film of titanium for added rigidity and
endurance against sun, salt and mois-
ture. Zinc plated grilles resist rusting
in the harshest conditions.
Available in black (Control 25) and
white (Control 25-WH).
Specifications:
Frequency Range (-10 dB)
1
: 80 Hz to 16 kHz
Continuous Program:
Power Capacity
2
: 150 Watts
Sensitivity
3
: 88 dB SPL, 1W, 1m
Directivity Factor (Q): 5.3
Directivity Index (DI): 7.2
Nominal Impedance: 8 ohms
Crossover Frequency: 3.0 kHz
Nominal Coverage: 90° x 90°
LF Driver: 135 mm (5.25 in) Polypropylene coated paper w/WeatherEdge
HF Driver: 19 mm (.75 in) Titanium coated polycarbonate
Enclosure Material: HIPS (High Impact Polystyrene)
Overload Protection: Full-Range power limiting to protect network and transducers
Termination: Spring terminals, accepts banana plug
Environmental: Conforms to Mil Spec 810 for humidity, salt spray,
temperature & UV. IEC 529 IP-X4 splashproof rating.
Dimensions (H x W x D): 236 x 188 x 149 mm (9.3 x 7.4 x 5.8 in)
Net Weight (ea): 2.3 kg (5 lbs)
Shipping Weight (pr): 5 kg (11 lbs)
Included Accessories: Invisiball Assembly
6 mm x 100 mm hex key
Optional Accessories:
MTC-25V: For vertical columnar orientation of up to 3 loudspeakers
MTC-25/23H: For horizontal splaying of two speakers. Three brackets array
up to six loudspeakers in a 360° array.
MTC-28/25CM: Ceiling-mount adapter.
MTC-25SSG: Stainless Steel Grille for harsh environments. Available in
silver, black (-BK) or white (-WH)
MTC-25WMG: WeatherMax™ Stainless Steel Grille protects against driving
precipitation. Available in black or white (-WH)
MTC-PC2: Input panel cover protects input terminals in outdoor
environments
1
Half-space (on-wall).
2
Continuous program power is a conservative expression of the system’s ability to handle normal speech and music
program material and is defined as 3 dB above the Continuous Pink Noise Rating (IEC-shaped pink noise with a 6 dB
crest factor, for 100 hours continuously).
3
Half-space (on-wall), ave 100 Hz to 10 kHz.
JBL continually engages in research related to product improvement. Changes introduced into existing products without
notice are an expression of that philosophy.
Professional Series
To Next Page
Need help?
General