Need help?Do you have a question about the JBL CSMA 2120 and is the answer not in the manual?
General safety guidelines for operating the amplifier, including power and grounding.
Specific warning regarding the UK mains plug and grounding requirements.
Compliance information related to EMC standards and potential interference.
Advice on locating the amplifier to avoid magnetic field interference.
Lists key features of the JBL CSMA series mixer-amplifiers.
Details the controls and indicators found on the front panel of the mixer-amplifier.
Describes rear panel connections and controls for the four-channel models.
Describes rear panel connections and controls for the eight-channel models.
Instructions for unpacking and inspecting the amplifier for transit damage.
Guidance on how to safely install the amplifier, including rack and surface mounting.
Guidelines for maintaining adequate airflow and space around the amplifier for cooling.
Recommendations for selecting appropriate wires and connectors for balanced and unbalanced inputs.
Details on connecting speakers to the amplifier for 70V or 100V systems and wire gauge selection.
Explains typical input and output wiring for connecting audio sources and speakers.
Instructions for safely connecting the amplifier to the AC power source.
Advice on preventing speaker damage from clipping and subsonic signals using HI-Z mode.
Step-by-step guide for powering on the amplifier for the first time.
Important safety precautions and operational guidelines before and during use.
Explains how to configure input signal routing between amplifiers and channels.
Details the function of the High-Z switch for 70V/100V operation and high-pass filtering.
Information on providing phantom power to microphones via the input channels.
How to use VOX ducking for automatic level adjustment during announcements.
How to set up priority muting for microphones or announcements.
How to implement remote volume control using the JBL CSR-V module.
Explains the automatic sleep mode function to save energy and how to wake the unit.
Describes the auxiliary output for connecting to additional amplifiers.
Common issues and their potential causes and solutions for the mixer-amplifier.
General| Brand | JBL |
|---|---|
| Model | CSMA 2120 |
| Category | Music Mixer |
| Language | English |
To Next Page
