Do you have a question about the JBL EON515XT/230 and is the answer not in the manual?
Maximum SPL Output | 126 dB |
---|---|
Coverage Pattern | 90° x 60° |
Amplifier Design | Class D |
Weight | 36.3 lbs |
Outputs | XLR |
Bluetooth | No |
Type | Powered Speaker |
Woofer | 15 in |
Tweeter | 1.5-inch |
Inputs | XLR |
Details system power, frequency response, SPL, and input characteristics.
Specifies test conditions for system, LF, and HF aural sweep.
Lists enclosure dimensions and shipping weight for the speaker.
Refers to the separate warranty statement packed with the product.
Identifies the baffle/grille assembly part number and its basic description.
Details the LF transducer, including voice coil and part number.
Details the HF transducer, including diaphragm and part number.
Lists the warranty and owner's manual part numbers included in the package.
Lists part numbers for packing fillers, bag, and cartons.
Details the AC power cord part numbers for 120V and 230V versions.
Identifies the high-frequency driver and its part number in the wiring diagram.
Identifies the low-frequency driver and its part number in the wiring diagram.
Specifies the part number for the wire harness assembly shown in the diagram.
Provides the detailed schematic for the wire harness assembly 364836-001.
Shows details for strap overhang, cable tie buckle, and connector housing.
Lists wire connections, colors, and part numbers for HSG1, including specific versions.
Details specific screws, washers, and rubber components used in assembly.
Identifies the main baffle/grille assembly and speaker driver part numbers.
Identifies the amplifier board, input module, and associated PCBs.
Lists part numbers for handles, input plates, and related mounting hardware.