ACOUSTIC & ELECTRICAL SPECIFICATIONS:
•
Nominal Impedance 8 Ohms
5.5 Ohms @ 85Hz
3.5 Ohms @ 40kHz
•
Max Amp Power 500 Watts*
•
Frequency Response 45Hz – 50kHz (–6dB)
32Hz – 50kHz (–10dB)
•
Sensitivity 96dB (2.83V @ 1 meter)
•
Crossover Frequency 150Hz (LF1 6dB/Octave)
700Hz (LF2 24dB/Octave)
20kHz (UHF 24dB/Octave)
SYSTEM COMPONENTS:
•
Grille 362088-001 (black)
362088-002 (white)
•
Low-Frequency Transducer 15" (381mm) Pulp-cone woofer
(1501AL) x 2 (362330-001)
DC Resistance 9.2 Ohms, ±10%
•
High-Frequency Transducer 4" (102mm) Beryllium
compression driver (476Be)
(362733-001)
DC Resistance 8.0 Ohms, ±10%
•
Ultrahigh-Frequency 1" (25mm) Beryllium compression
Transducer driver (045Be-1) (362366-001)
DC Resistance 3.1 Ohms, ±10%
•
Crossover Network 361900-004, UHF
361900-003, HF
361900-001, LF1
361900-002, LF2
AURAL SWEEP TEST SPECIFICATIONS:
•
System Aural Sweep Test 6.0V Input 45Hz to 20kHz
•
L.F.1 Aural Sweep Test 5.0V Input 45Hz to 1kHz
•
L.F.2 Aural Sweep Test 5.0V Input 45Hz to 1kHz
•
H.F. Aural Sweep Test 1.00V Input 700Hz to 20kHz
•
H.F. Aural Sweep Test N/A
PHYSICAL SPECIFICATIONS:
•
Dimensions (H x W x D) 38" x 43-5/8" x 18-1/2"
(including feet) (965mm x 1109mm x 469mm)
•
Weight (without grille) 302 lb (137kg) (each)
•
Weight (with grille) 312 lb (142kg) (each)
WARRANTY:
•
Refer to Warranty Statement packed with each product.
*
The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
Technical Manual
Everest DD66000
Everest DD66000
Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, New York 11797
8/07
To Next Page
Need help?
General
