EasyManua.ls Logo

JBL EON518S/230 - User Manual

JBL EON518S/230
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
JBL EON518S/230 REV I
PACKAGE
WIRING DIAGRAM
12-12
Technical Manual
JBL EON518S/230
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
Systen Power Rating: 500W continuous, 1000W peak
Frequency Response: 42 Hz –100 Hz (±3 dB)
Frequency Range: 36 Hz -130 Hz (-10 dB)
Input Gain: - infinity to +4 dBu
Input Impedance: Nominal 20K ohms (balanced)
Maximum SPL: 129 dB, 1 watt @ 1 meter
Crossover Frequency: 120 Hz (HPF switchable on outputs)
SYSTEM COMPONENTS:
Cabinet Enclosure (Not for Sale)
Baffle/Grille Assembly: 441958-001
Low Frequency 268G, 460 mm (18 in) Differential
Transducer: Drive® integated woofer with dual
voice coils, 4 ohm impedance
DC Resistance: 2.60 ohm ±10%
Input Connectors: Balanced XLRs with loop through
SYSTEM COMPONENTS:
(CONT’D)
(stereo) to balance XLR satellite
outputs. 1/4” Speaker level input
XLR Pin Assignments: Pin 2 (+), Pin 3 (-), Pin 1 (GND)
Suspension/ Mounting: 36 mm pole socket on the top
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 500mV Input, 20 Hz to 500 Hz
Sweep Duration: 5 seconds
B. L.F. Aural Sweep Test: 3.5V Input, 10 Hz to 300 Hz
PHYSICAL SPECIFICATIONS:
Enclosure Dimensions: 617 x 569 x 652 mm D
(24.3 x 22.4 x 25.7 in D)
Shipping Weight: 65 lb (29.5 kg.)
WARRANTY INFORMATION:
Refer to Warranty Statement packed with each product.
Driver, Low Freq.
268G
(364481-001X)
Cone Repl
C4R268
RED
BLK
Amplifier Assembly
Warranty 59660
Owner’s Manual
364822-001
(Available on
web-site only)
-
+
Top / Bottom Inner, (2)
364817-001
PKG, Microfoam
49790P
20” x18” sheets
Carton
364816-001
Cord, AC, Line
425-00000-00 120V
425-00000-01 230V
Question and Answer IconNeed help?

Do you have a question about the JBL EON518S/230 and is the answer not in the manual?

Summary

Acoustic and Electrical Specifications

System Components

XLR Pin Assignments

Specifies pin configuration for XLR satellite outputs and 1/4" speaker level input.

Suspension;Mounting

Details the mounting method using a 36 mm pole socket.

Package Contents

Aural Sweep Test Specifications

System Aural Sweep Test

Specifies input voltage, frequency range, and sweep duration for system testing.

L.F. Aural Sweep Test

Specifies input voltage and frequency range for low-frequency testing.

Physical Specifications

Enclosure Dimensions

Provides the physical size of the enclosure in millimeters and inches.

Shipping Weight

States the total weight of the product for shipping purposes in pounds.

Warranty Information

Wiring Diagram

Component Exploded View

Summary

Acoustic and Electrical Specifications

System Components

XLR Pin Assignments

Specifies pin configuration for XLR satellite outputs and 1/4" speaker level input.

Suspension;Mounting

Details the mounting method using a 36 mm pole socket.

Package Contents

Aural Sweep Test Specifications

System Aural Sweep Test

Specifies input voltage, frequency range, and sweep duration for system testing.

L.F. Aural Sweep Test

Specifies input voltage and frequency range for low-frequency testing.

Physical Specifications

Enclosure Dimensions

Provides the physical size of the enclosure in millimeters and inches.

Shipping Weight

States the total weight of the product for shipping purposes in pounds.

Warranty Information

Wiring Diagram

Component Exploded View

JBL EON518S/230 Specifications

General IconGeneral
Power Output500 W
Output ConnectorsXLR
Amplifier Power500 W
Weight29.5 kg (65 lbs)
System TypeSubwoofer
Driver Size18 inches
LF Driver1 x 18" woofer
Input ConnectorsXLR, 1/4 inch TRS
AC Power100-240V, 50/60Hz

Related product manuals