Do you have a question about the JBL ES30 and is the answer not in the manual?
The rated electrical resistance of the speaker.
The maximum recommended amplifier power rating.
The range of audible frequencies the speaker reproduces.
The speaker's loudness for a given input power level.
Frequencies where audio signals are divided between drivers.
The main enclosure for the speaker.
The protective grille assembly for the speaker.
The woofer component of the speaker.
The tweeter component of the speaker.
The ultra-high frequency driver component.
The internal circuit that divides audio frequencies.
Audio sweep test for overall speaker system response.
Audio sweep test for low-frequency driver response.
Audio sweep test for high-frequency driver response.
Audio sweep test for ultra-high frequency driver response.
The physical size (Height x Width x Depth) of the speaker.
The mass of the speaker unit.
Wiring details for the high-frequency driver.
Wiring details for the ultra-high frequency driver.
Schematic representation of the crossover circuit.
Wiring details for the low-frequency driver.
Circuit diagram for the primary audio input.
Circuit diagram for the secondary audio input.
List and identification of speaker components.
Important notes regarding specific part assembly.
The rated electrical resistance of the speaker.
The maximum recommended amplifier power rating.
The range of audible frequencies the speaker reproduces.
The speaker's loudness for a given input power level.
Frequencies where audio signals are divided between drivers.
The main enclosure for the speaker.
The protective grille assembly for the speaker.
The woofer component of the speaker.
The tweeter component of the speaker.
The ultra-high frequency driver component.
The internal circuit that divides audio frequencies.
Audio sweep test for overall speaker system response.
Audio sweep test for low-frequency driver response.
Audio sweep test for high-frequency driver response.
Audio sweep test for ultra-high frequency driver response.
The physical size (Height x Width x Depth) of the speaker.
The mass of the speaker unit.
Wiring details for the high-frequency driver.
Wiring details for the ultra-high frequency driver.
Schematic representation of the crossover circuit.
Wiring details for the low-frequency driver.
Circuit diagram for the primary audio input.
Circuit diagram for the secondary audio input.
List and identification of speaker components.
Important notes regarding specific part assembly.
| Type | Bookshelf |
|---|---|
| Sensitivity | 88dB |
| Impedance | 8 ohms |
| Woofer | 6" PolyPlas |
| Tweeter | 3/4" Titanium-laminate dome |
| Super Tweeter | 3/4" Polyester-film ring radiator |
| Crossover Frequencies | 2.5kHz |
| Weight | 8.9kg (19.5 lb) |
Loading...