Need help?Do you have a question about the JBL GT5-A604 and is the answer not in the manual?
Disconnect the negative (-) lead from your vehicle's battery before installation.
Note fuel lines, brake lines, vacuum lines, and electrical wiring during installation.
Select a location away from moisture with sufficient air circulation for cooling.
Details RMS power output for 4-ohm and 2-ohm configurations, including THD+N.
Specifies frequency response range and maximum input signal/sensitivity.
Provides Signal-to-Noise Ratio (SNR) values based on different power references.
Connect speakers to terminals, observing polarity for 4, 3, or 2-channel operation.
Details +12V battery connection, GND chassis connection, and REM remote turn-on.
Describes RCA inputs for front/rear and AUX output for subwoofer amplifier connection.
Explains Input-Level, Crossover-Frequency, and Crossover-Filter selectors for front/rear.
Describes Power On LED, Protect LED, and Rear Bass-Boost control.
Procedure to match amplifier input level to source unit output for optimal sound.
Guides for setting crossover frequencies for various speaker configurations.
To Next Page
General
