Need help?Do you have a question about the JBL GTR-7535 and is the answer not in the manual?
Details crucial safety measures and considerations before and during amplifier installation.
Explains how to connect speakers to amplifier terminals for various configurations.
Provides guidance on replacing amplifier fuses with the correct amperage.
Guides on connecting the power and ground wires to the amplifier, including wire gauge recommendations.
Instructions for connecting the remote turn-on lead for specific amplifier models.
Details how to connect audio sources using RCA patch cables.
How to select high-pass, low-pass, or full-range filtering for speakers.
Procedure for adjusting the amplifier's gain setting to match input sensitivity.
Instructions for connecting the remote turn-on lead for GTR-102 and GTR-104 models.
Details hands-free calling, music streaming, and device pairing capabilities.
Step-by-step procedure for matching amplifier input sensitivity to source unit output.
Guidance on using crossover filter selectors and frequency controls.
Details crucial safety measures and considerations before and during amplifier installation.
Explains how to connect speakers to amplifier terminals for various configurations.
Provides guidance on replacing amplifier fuses with the correct amperage.
Guides on connecting the power and ground wires to the amplifier, including wire gauge recommendations.
Instructions for connecting the remote turn-on lead for specific amplifier models.
Details how to connect audio sources using RCA patch cables.
How to select high-pass, low-pass, or full-range filtering for speakers.
Procedure for adjusting the amplifier's gain setting to match input sensitivity.
Instructions for connecting the remote turn-on lead for GTR-102 and GTR-104 models.
Details hands-free calling, music streaming, and device pairing capabilities.
Step-by-step procedure for matching amplifier input sensitivity to source unit output.
Guidance on using crossover filter selectors and frequency controls.
General| Channels | 5 |
|---|---|
| Frequency Response | 20Hz - 20kHz |
| THD + N | < 1% |
| Signal-to-Noise Ratio | > 80dB |
| Input Sensitivity | 200mV - 4V |
| Bass Boost | 0 - 12dB |
| RMS Power @ 4 Ohms | 75W |
| Bridged RMS Power @ 4 Ohms | 200W |
| Crossover Frequency | 50Hz - 200Hz |
To Next Page
