Need help?Do you have a question about the JBL GTO504 and is the answer not in the manual?
General| Impedance | 4 Ω |
|---|---|
| Frequency range | 10 - 100000 Hz |
| RMS rated power | 55 W |
| Audio output channels | 4.0 channels |
| Total Harmonic Distortion (THD) | 0.02 % |
| Output power | 280 W |
| Connectivity technology | Wired |
| Product color | Black, Silver |
Provides essential warnings and practical advice for safely installing the amplifier, emphasizing precautions regarding vehicle components and mounting conditions.
Details the technical performance metrics of the amplifier, including power output, impedance compatibility, THD+N, signal-to-noise ratio, and frequency response.
Explains how to connect speakers to the amplifier's output terminals for various channel configurations (four, three, or two-channel bridged).
Details the connection requirements for the +12V battery terminal, chassis ground (GND), and remote turn-on lead (REM).
Covers RCA connections for front and rear inputs, auxiliary outputs, and associated input level controls for signal matching.
Describes the function of frequency, LPF, HPF, and crossover selector controls for both front and rear channels to manage speaker frequency ranges.
Explains the function of the Power On LED and the Protect LED, which indicates system faults or protection modes.
Provides a step-by-step procedure for adjusting the input level controls to match the source unit's output for optimal sound quality.
Guides users on selecting appropriate crossover frequencies and filter types (LPF, HPF, FLAT) for different speaker configurations and subwoofer usage.
To Next Page
