Need help?Do you have a question about the JBL GTO-804EZ and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Amplifier Class | D |
| Number of Channels | 4 |
| Frequency Response (Sub) | 10Hz - 150Hz |
| Signal-to-Noise Ratio | 80dB |
| Peak Power | 800 Watts |
| Signal-to-Noise Ratio (Sub) | 80dB |
| THD at Rated Power | < 1% |
| Low Pass Filter | 50Hz – 150Hz |
| Bass Boost | 0dB – 12dB @ 45Hz |
| Input Sensitivity | 0.2V – 4V |
| Peak Power Output | 200W x 4 |
| Signal-to-Noise Ratio (Full) | 100 dB |
| Fuse Rating | 25A |
Specific guidance for making a secure chassis ground connection.
Procedure for connecting the main power wire and fuse to the amplifier.
General guidelines for connecting speakers to amplifier channels.
How to connect speakers for high-power bridged operation.
Overview of connecting audio sources to the amplifier.
How to connect audio sources using RCA or adapter wires.
Instructions for configuring crossover filter settings for optimal sound.
Setting the HP/LP/Full-range filter for each channel.
To Next Page
