JBL GTO 75.2 - Connections Overview

3
FREQ
MODE
HP LP FLAT
+
–
Figure 4. GTO75.2/75.2II amplifier set up for stereo operation.
Figure 5. GTO75.2/75.2II amplifier set up for bridged-
mono operation.
CONNECTIONS – GTO75.2/75.2II
The JBL GTO75.2/75.2II amplifier can be
set up for stereo or bridged-mono
operation, as shown in
Figures 4 and 5.
NOTE: For simplicity, Figures 4 and 5
do not show power, remote and input
connections.
NOTE: Minimum speaker impedance
for stereo operation is 2 ohms.
Minimum speaker impedance for
bridged operation is 4 ohms.
FREQ
MODE
HP LP FLAT
+
–
–
+
GTO Amp OM 2/3/04 3:54 PM Page 3
4
GTO 75.2/75.2II