JBL HLS 810 User Manual

Technical Manual
HLS 810
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance 8 ohms
• Max Amp Power 150 watts
• Frequency Response 50Hz - 20kHz (+
3dB)
• Sensitivity 89 dB (1 watt @ 1 meter)
• Crossover Frequency 2600 Hz
SYSTEM COMPONENTS:
• Cabinet HLS 810 (Not For Sale)
• Grille 332674-001
• Low Frequency Transducer* 8” Polypropylene,
Shielded (332651-001)
DC Resistance 4.4 ohms ±10%
• High Frequency Transducer* 10mm Polycarbonate Dome
(TW010B17/101829B)
SYSTEM COMPONENTS: (cont.)
DC Resistance 5.5 ohms ±10%
• Crossover Network 332678-001
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep Test 6.0V Input 50 Hz to 20 kHz
• L.F. Aural Sweep Test 6.0V Input 40 Hz to 3 kHz
• H.F. Aural Sweep Test 2.83V Input 2 kHz to 20 kHz
PHYSICAL SPECIFICATIONS
• Enclosure dimensions: 19 7/16 x 9 3/4 x 9 3/4”
(H x W x D) 494 x 248 x 248mm
• Weight 43lbs. (19.5kg). Sold in Pairs.
WARRANTY:
• Refer to Warranty Statement packed with each product.
Owner's Manual
332661-001
Survey Card
331384-001
Warranty Card
331994-001
Upper Foam
332675-001
Lower Foam
332676-001
OWNER'S
MANUAL
Outer Carton
332677-001
PACKAGING
WIRING DIAGRAM
3-99
JBL Consumer Products, Inc. 250 Crossways Park Dr., Woodbury, New York 11797
HLS 810
YEL
High Frequency*
TW010B17/101829B
Low Frequency*
332651-001
GRN/BLK
GRN
Network
332678-001
YEL/BLK
– +
HLS 810 SCHEMATIC
L1
1.50 mH
L3
0.33 mH
L2
0.33 mH
C1
33 mfd 50V
C2
30 mfd 50V
18" GREEN
18" GREEN/BLK
15" YELLOW
15" YELLOW/BLK
H.F.
L.F.
.250
.205
.110
.187
+IN
–IN
C3
2.7 mfd 50V
INPUT
+
+

JBL HLS 810 Specifications

General

Frequency Response	45Hz - 20kHz
Impedance	8 ohms
Sensitivity	90dB
Power Handling	150 watts
Woofer Size	8 inches
Tweeter Size	1 inch
Way	3-Way
Type	bookshelf

Summary

Acoustic and Electrical Specifications

Nominal Impedance

The nominal impedance of the HLS 810 speaker system.

Max Amp Power

The maximum amplifier power handling capability for the HLS 810.

Frequency Response

The frequency range covered by the HLS 810, with a specified tolerance.

Sensitivity

The sound pressure level output for a given input power and distance.

Crossover Frequency

The frequency point at which the audio signal is divided between drivers.

System Components

Cabinet

Details about the loudspeaker enclosure, including part number.

Grille

Information regarding the grille component for the HLS 810.

Low Frequency Transducer

Specifications for the woofer, including material and part number.

High Frequency Transducer

Specifications for the tweeter, including diaphragm material.

DC Resistance

The DC resistance measurement of the low frequency transducer.

Crossover Network

Part number for the internal crossover network.

Aural Sweep Test Specifications

System Aural Sweep Test

Test specification for the entire system's frequency response.

L.F. Aural Sweep Test

Test specification for the low frequency driver's sweep.

H.F. Aural Sweep Test

Test specification for the high frequency driver's sweep.

Physical Specifications

Enclosure Dimensions

The physical height, width, and depth of the speaker enclosure.

Weight

The weight of the speaker system, including packaging details.

Packaging Details

Packaging Components

Lists components included in the speaker packaging.

Wiring and Schematic Diagrams

Wiring Diagram

Illustrates the connections for high and low frequency drivers.

HLS 810 Schematic

Provides the internal circuit schematic for the HLS 810 speaker.

Component Exploded View

Cabinet Assembly

Illustration showing the main cabinet and its associated parts.

Port Tube

Details of the port tube component and its part number.

Terminal Cup

Information on the terminal cup used for audio input.

Crossover Network

Part number and illustration of the crossover network.

Woofer Component

Illustration and part number for the low frequency transducer.

Tweeter Component

Illustration and part number for the high frequency transducer.

Grille Assembly

Illustration of the grille and its retainer parts.