JBL HLS 610 User Manual

Technical Manual
HLS 610
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance 8 ohms
• Max Amp Power 125 watts
• Frequency Response 55Hz - 20kHz (+
3dB)
• Sensitivity 88 dB (1 watt @ 1 meter)
• Crossover Frequency 2700 Hz
SYSTEM COMPONENTS:
• Cabinet HLS 610 (Not For Sale)
• Grille 332657-001
• Low Frequency Transducer* 6 1/2” Polypropylene,
Shielded (332650-001)
DC Resistance 4.4 ohms ±10%
• High Frequency Transducer*10mm Polycarbonate Dome
(TW010B17/101829B)
SYSTEM COMPONENTS: (cont.)
DC Resistance 5.5 ohms ±10%
• Crossover Network 332664-001
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep Test 6.0V Input 50 Hz to 20 kHz
• L.F. Aural Sweep Test 6.0V Input 40 Hz to 3 kHz
• H.F. Aural Sweep Test 2.83V Input 2 kHz to 20 kHz
PHYSICAL SPECIFICATIONS
• Enclosure dimensions: 16 1/4 x 8 5/16 x 9 7/16”
(H x W x D) 413 x 211 x 240mm
• Weight: 29lbs. (13.1kg). Sold in Pairs
WARRANTY:
• Refer to Warranty Statement packed with each product.
Owner's Manual
332661-001
Survey Card
331384-001
Warranty Card
331994-001
Upper Foam
332658-001
Lower Foam
332658-001
OWNER'S
MANUAL
Outer Carton
332660-001
PACKAGING
WIRING DIAGRAM
3-99
JBL Consumer Products, Inc. 250 Crossways Park Dr., Woodbury, New York 11797
HLS 610
YEL
High Frequency*
TW010B17/101829B
Low Frequency*
332650-001
GRN/BLK
GRN
Network
332664-001
YEL/BLK
– +
L1
1.85 mH
C1
10 mfd
50V
9.00" GREEN
9.00" GREEN/BLK
14.00" YELLOW
14.00" YELLOW/BLK
H.F.
L.F.
.250
.205
.110
.187
+IN
–IN
C2
2.2 mFd, 50V
INPUT
+
+
HLS 610 SCHEMATIC

JBL HLS 610 Specifications

General

Type	Bookshelf
Configuration	2-way
Sensitivity	90 dB
Impedance	8 ohms
Recommended Amplifier Power	10 - 125 watts
Woofer Size	6.5 in (165 mm)
Tweeter Size	0.75 in (19 mm)
Tweeter	Titanium-laminate dome

Summary

Acoustic and Electrical Specifications

Nominal Impedance

Speaker's nominal impedance rating in ohms.

Max Amplifier Power

Maximum power handling capability in watts.

Frequency Response

Range of audible frequencies reproduced, with tolerance.

Sensitivity

Sound pressure level at 1 meter for 1 watt input.

Crossover Frequency

Frequency point for signal division between drivers.

System Components

Low Frequency Transducer

Details of the woofer, including material and DC resistance.

High Frequency Transducer