Specifications HT1F HT1D HT1S
High Frequency 1" Pure 1" Pure N/A
Dome Transducer Titanium Titanium
Mid-bass Transducer 5" 5" N/A
(High Polymer Laminate)
Low Frequency N/A N/A 12"
(High Polymer Laminate)
Crossover Frequency 2.8 kHz 2.8 kHz N/A
Frequency 70 Hz to 110 Hz to 35 Hz to
Response (- 6 dB) 20 kHz 20 kHz 80 Hz
Sensitivity(1 Watt/1 meter) 87 dB 87 dB 91 dB
Nominal Impedance 8 ohms 6 ohms 6 ohms
Recommended 10 to 100 10 to 100 10 to 100
Amplifier Power* Watts Watts Watts
External Dimensions
Height 17-1/2" 13-7/8" 21-1/2"
Width 10" 9-1/4" 25-1/4"
Depth 8-1/2" 7-3/4" 17-5/8"
External Dimensions
Height 445 mm 352 mm 546 mm
Width 254 mm 235 mm 641 mm
Depth 216 mm 197 mm 448 mm
Weight (each) 21 lbs 15 lbs 62 lbs
9.5 kg 6.8 kg 28.1 kg
Shipping Weight 73 lbs 38 lbs 76 lbs
33.2 kg 17.3 kg 34.5 kg
*Undistorted continuous power per channel.
JBL continually strives to improve its speakers. New materials, production
methods and design refinements are introduced into existing models without
notice as a routine expression of our design philosophy. For this reason,
JBL HT Series Loudspeakers may differ in some respect from their published
specifications and descriptions, but will always equal or exceed the original
specifications unless otherwise stated.
THX is a registered trademark of Lucasfilm LTD. Manufactured under license of Lucasfilm LTD.
10
HT manual-Europe 7/27/98 4:16 PM Page 3
To Next Page
Loading...
