Need help?Do you have a question about the JBL JRX100 and is the answer not in the manual?
Methods for attaching to I-beams using beam clamps, requiring engineer approval.
Methods for attaching to H-beams using custom clamps, requiring engineer approval.
Methods for attaching to box beams using custom clamps, requiring engineer approval.
Methods for attaching to I-beams using beam clamps, requiring engineer approval.
Methods for attaching to H-beams using custom clamps, requiring engineer approval.
Methods for attaching to box beams using custom clamps, requiring engineer approval.
General| Nominal Impedance | 8 ohms |
|---|---|
| Frequency Range (-10 dB) | 50 Hz - 18 kHz |
| Maximum SPL | 128 dB |
| Nominal Dispersion | 90° x 50° |
| High Frequency Driver | 1" diaphragm compression driver |
| Input Connectors | 1/4" TS phone jack and Neutrik Speakon NL4 |
| Enclosure Material | plywood |
| Power Capacity | 250 W |
| Sensitivity | 98 dB SPL |
| Dimensions | 24.5 x 18.1 x 17.0 inches |
| Weight | 60 lbs |
To Next Page
