Need help?Do you have a question about the JBL L52 Classic and is the answer not in the manual?
General| Frequency Response | 47Hz - 24kHz (-6dB) |
|---|---|
| Sensitivity | 85dB (2.83V/1m) |
| Crossover Frequency | 2.8kHz |
| Recommended Amplifier Power | 10 - 75W RMS |
| Type | 2-way bookshelf speaker |
| Dimensions | 330mm x 197mm x 216mm |
| Low-Frequency Driver | 5.25-inch (133mm) Pure Pulp woofer |
| High-Frequency Driver | 0.75-inch (19mm) titanium dome tweeter |
| Enclosure | Bass-reflex via front-firing port |
| Finish | Walnut wood veneer |
| Impedance | 4 ohms |
Product compliance with Directive 2011/65/EU on restriction of hazardous substances in electrical and electronic equipment.
Addresses chemical substances, potential impacts on human health and environment, and lead content according to REACH regulation.
Lists items included with the L52 Classic loudspeaker, such as the speakers, grilles, and quick start guide.
Guidance on optimal speaker placement for sound quality, including distance and angle recommendations.
Instructions for connecting the amplifier to the speaker using various connector types like bare wire or banana plugs.
Front-panel adjustment for balancing the tweeter level relative to the woofer for desired sound.
Recommendations for cleaning the speaker cabinets and grilles to maintain their finish and performance.
To Next Page
