EN
This equipment complies with European COMMISSION REGULATION (EU) 2023/826
Model: MA7100HP
Power supply: 100-120V/220-240V~, 50/60Hz
Standby consumption (NET O/NET On): <0.5W / <2W
Max. operating temperature: 35°C
Model: MA9100HP
Power supply: 100-120V/220-240V~, 50/60Hz
Standby consumption (NET O/NET On): <0.5W / <2W
Max. operating temperature: 35°C
Standby time
When there is no audio input and no user operation, within 20 minutes, unit will enter standby mode.
User can change the standby mode through the menu, "Setup" -> "System Setup" -> "General Setup" -> "Standby Mode".
User also can change the auto standby time through the menu, "Setup" -> "System Setup" -> "General Setup" -> "Auto Standby".
To switch o wireless network, please go to Setup > System Setup > General Setup > Power Mode and select Green mode.
Standby Button LED Behavior
System State Standby Button LED Color
Standby Amber
Normal operation with ampliers powered White
Fault condition (e.g. over temperature, speaker short circuit) Flashing amber, 2x per second
Firmware upgrade Quick ashing amber, 4x per second
Harman International Industries, Incorporated.
8500 Balboa Blvd, Northridge CA 91329 United States.
European Representative: Harman International Industries, Incorporated.
EMEA Liaison Oce, Danzigerkade 16G, 1013 AP Amsterdam, The Netherlands.
UK Business Address: Ground Floor, Westside 2, London Road, Apsley, Hemel Hempstead, Hertfordshire, HP3 9TD, United Kingdom.
© 2024 Harman International Industries, Incorporated. All Rights Reserved.
JBL is a trademark of Harman International Industries, Incorporated registered in the United States and other countries.
Features, Specications, and Appearance subject to change without notice.
MA7100HP MA9100HP Quick Start Guide | rev1.6 20240730 | Features, Specifications, and Appearance subject to change without notice. Pg 9 of 9
To Next Page
Loading...
