18
Heat Emission
Any power that enters the amplifier through the power cord and does not exit through the
speaker outputs turns into heat, which the amplifier must rid itself of by exhausting it to the
outside. In indoor use this may present a challenge to the buildings air conditioning system.
Use the table below to predict the heat that will be emitted by your amplifier.
Note: the audio test signal for 1/8 and 1/3 power testing is pink noise; the signal for full-
power testing is a 1 kHz sine wave.
rewoPlluFrewoP3/1 *rewoP8/1eldI
ledoMdaoLlennahCrh/UTBrh/lackrh/UTBrh/lack
rh/UTB rh/lackrh/UTBrh/lack
,002CPM
T002CPM
8Ω 8+ Ω 546361516551
015 8215822
4Ω 4+ Ω 56218130601762 038 0125822
2Ω 2+ Ω 04320950071924
5921 6235822
V001,V07,V5256314430501462
008 2025822
,003CPM
T003CPM
8Ω 8+ Ω 60414530201752
406 25192285
4Ω 4+ Ω 52527367161804
129 23292285
2Ω 2+ Ω 856447112352836
0921 52392285
V001,V07,V5201027053051973 1411 88292285
,006CPM
T006CPM
8Ω 8+ Ω 19712549321213
508 30279257
4Ω 4+ Ω 03330481802525
2221 80379257
2Ω 2+ Ω 896573416413397
1161 60479257
V001,V07,V5227731598332985
0821 32379257
* Analogous to normal audio program with moderate to heavy clipping.
To Next Page
Loading...
Need help?
General
