To Next PageTo Next Page
Need help?Do you have a question about the JBL MR-140 and is the answer not in the manual?
General| Tuner | FM/AM |
|---|---|
| Bluetooth | Yes |
| USB Port | Yes |
| Aux Input | Yes |
| Display | LCD |
| Frequency Response | 20Hz - 20kHz |
| Signal-to-Noise Ratio | 80dB |
| Supported Formats | MP3, WMA |
Manual resetting of the internal microprocessor. Note: radio presets will be erased.
Advice on cooling the unit, CD care, and handling to maintain quality.
Procedure to reset the unit by pressing MODE and BAND buttons for 3 seconds.
Search tracks and fast forward or fast rewind the disc.
Control playback by pausing and resuming.
Hear the first 10 seconds of each track on the disc.
Play a selected track repeatedly.
Play all tracks on a CD in random sequence.
Seek radio stations automatically or manually tune.
Memorize radio stations to preset buttons.
Automatically store up to six strong radio stations.
Select memorized radio stations using preset buttons.
Indicates stereo broadcast reception for FM stations.
Ensure proper connection to a good ground point on the boat.
Unit is suitable for boats with negative ground systems only.
Disconnect battery before wiring and ensure secure connections.
Choose location to avoid interference, high temperatures, dust, and vibration.
Adjust the mounting angle to less than 20 degrees from horizontal.
Select sound atmosphere modes like FLAT, CLASSICS, POP, ROCK.
Display time or frequency and set the clock.
Mute sound temporarily or restore original volume setting.
Adjust and set the initial volume level upon powering on.
Select USA or EUR area for radio tuning format.
Adjust volume, bass, treble, balance, and fader.
Select input source: Radio, CD, or AUX.
Select radio bands or activate loudness feature.
Instructions for replacing blown fuses and warnings.
Turn the unit on or off.
Select audio controls or special functions like Beep 2nd.
Eject the compact disc from the player.
Switch between Radio, CD, and AUX input modes.
Select different sound equalizer modes.
Select radio bands (FM1-FM3, AM1-AM2) or activate Loudness.
Tune radio stations or CD tracks.
Control CD playback or set radio presets.
Scan the first 10 seconds of CD tracks or set radio presets.
Repeat CD tracks or set radio presets.
Play CD tracks randomly or set radio presets.
Select stored radio stations (1-6).
Temporarily mute the audio output.
Switch display between Time and Frequency.
Perform Auto Preset Scan to find stations.
