Do you have a question about the JBL P1220 and is the answer not in the manual?
Power Handling (RMS) | 300 Watts |
---|---|
Power Handling (Peak) | 1200 Watts |
Impedance | 4 Ohms |
Type | Car Subwoofer |
Size | 12 inches |
Driver Size | 12 inches |
Enclosure Type | Optimized for both vented and sealed enclosures |
Key electrical and physical parameters including diameter, sensitivity, power handling, frequency response, impedance, and voice coil dimensions.
Detailed acoustic and mechanical parameters like DC resistance, inductance, radiating area, compliance, mass, resonance, and excursion limits.
Recommended sealed enclosure volume (1.00 ft³) including driver displacement for optimal performance.
Frequency response graph for the woofer in a sealed enclosure at 2.83V sensitivity.
Transducer excursion graph for the woofer in a sealed enclosure at 450W power handling.
Recommended vented enclosure volume (2.25 ft³) including driver and port displacement.
Frequency response graph for the woofer in a vented enclosure at 2.83V sensitivity.
Transducer excursion graph for the woofer in a vented enclosure at 500W power handling.
Recommended sealed bandpass enclosure volume (2.00 ft³ front, 1.50 ft³ rear).
Frequency response graph for the woofer in a sealed bandpass enclosure at 2.83V sensitivity.
Transducer excursion graph for the woofer in a sealed bandpass enclosure at 400W power handling.