JBL PSW800 User Manual

thank you for choosing JBL. For over 50 years, JBL
has been involved in every aspect of musical and film recording
and reproduction, from live performances to monitoring the
recordings you play in your home, car, or office.
We’re confident that the
JBL loudspeaker you have
chosen will provide every note of enjoyment that you expected –
and that when you think about purchasing additional audio
equipment for your home, car, or office, you will once again
choose JBL.
Please take a moment to complete the enclosed profile card.
It enables us to keep you posted on our latest advancements,
and helps us to better understand our customers and build
products that meet your needs and expectations.
JBL Consumer Products
PSW800
Powered
Subwoofer
simple
set-up guide
PSW800 OM 7/22/98 3:27 PM Page 1

JBL PSW800 Specifications

Power

amplifier power	80 watts

Driver

driver size	8 inches

Inputs and Outputs

inputs line-level	yes
inputs high-level	yes
outputs high-level with high-pass filter	180 Hz

Frequency

crossover frequency	50Hz – 150Hz
frequency response	45Hz – 150Hz

Weight and Dimensions

dimensions	9-1/4 x 14 x 12-1/2 inches
dimensions metric	235 x 356 x 318 mm
weight	23 lbs

Summary

Important Safety Precautions

General Operating & Handling Instructions

Covers reading instructions, retaining them, heeding warnings, following procedures, power sources, grounding, cord safety, cleaning, non-use, lightning protection, and avoiding overloading and foreign objects.

Environmental & Placement Guidelines

Advises against using near water, unstable surfaces, or heat sources. Details wall/ceiling mounting and ventilation requirements.

Service & Repair Procedures

Outlines conditions requiring service, use of approved attachments/parts, safety checks, and prohibition of self-servicing.

Placement

Recommended Placement

Illustrates recommended placement of the subwoofer in a front corner of the room for optimal performance.

Hookup Procedures

Line-Level Connection

Diagram and explanation for connecting the subwoofer using line-level inputs from a receiver/amplifier.

Speaker-Level Connection

Diagram and explanation for connecting the subwoofer using speaker-level (high-level) inputs from a receiver/amplifier.

Operation and Troubleshooting

Operating Modes

Details the operating modes: Off, On, and Standby, and their procedures for the subwoofer.

Volume and Crossover Adjustment

Explains how to adjust the subwoofer's volume level and crossover frequency for optimal sound.

Troubleshooting Common Issues

Provides solutions for 'no sound' or 'low bass output' issues when using high-level or line-level inputs.

Specifications

Technical Details

Lists amplifier power, driver size, input/output types, crossover and frequency response ranges, dimensions, and weight.

Manufacturer Information

Provides contact details, registered trademarks, copyright information, and company affiliation.