Do you have a question about the JBL P1224 and is the answer not in the manual?
Type | Car Subwoofer |
---|---|
Size | 12 inches |
Driver Size | 12 inches |
Power Handling (RMS) | 400 Watts |
Power Handling (Peak) | 1600 Watts |
Impedance | 4 ohms |
Sensitivity | 93 dB |
Voice Coil Diameter | 2.5 inches |
Magnet Weight | 60 oz |
Mounting Depth | 6.5 inches |
Enclosure Type | Sealed |
Details core parameters like diameter, sensitivity, power handling, frequency response, impedance, and voice-coil diameter.
Provides physical measurements including mounting depth, cutout diameter, and outer diameter for installation.
Lists electrical characteristics such as DC resistance, inductance, and motor force factor.
Details mechanical properties including compliance, moving mass, resonance frequency, and excursion limits.
Specifies the recommended enclosure volume including driver displacement for optimal performance.
Presents the frequency response curve for the P1224 in a sealed enclosure at 2.83V.
Illustrates the transducer's excursion limits within a sealed enclosure at 400W power.
Details the recommended volume for a vented enclosure, including driver and port displacements.
Shows the frequency response graph for the P1224 when used in a vented enclosure.
Illustrates the transducer's excursion within a vented enclosure at 400W power.
Specifies volumes for front and rear chambers of a bandpass enclosure, including displacements.
Presents the frequency response curve for the P1224 in a bandpass enclosure configuration.
Shows the transducer's excursion limits in a bandpass enclosure at 400W power.