EN
EN-5
Safety Guidelines EN-2
Welcome EN-4
Before You Begin… EN-6
Trademark Acknowledgments EN-8
Rear Panel Connections and Controls EN-9
Audio/Video Connections EN-10
Connection Guide EN-12
Radio & Wireless Audio Connectors EN-13
Other Connectors EN-14
Speakers EN-15
Connecting Speakers EN-16
Operation EN-17
Extended front panel menu EN-18
Updating firmware via USB EN-18
Front Panel Operation EN-19
Remote Control EN-20
Customising the Remote EN-22
Essential Setup EN-28
Auto Speaker Setup EN-29
Setup Menus EN-30
Connecting to a Network EN-34
Contents
Decoding Modes EN-35
Tuner Operation EN-37
Troubleshooting EN-38
Specifications EN-40
Worldwide Guarantee EN-42
Professional installation?
It may be that the Receiver has been installed and set up as part of your Hi-Fi installation by a qualified JBL Synthesis dealer. In
this case, you may wish to skip the sections of this handbook dealing with installation and setting up, and move directly to the
sections dealing with using the unit. Use the Contents list to guide you to these sections.
DIY setup?
The Receiver is a powerful and sophisticated piece of AV equipment. If you are setting the unit up yourself, it is recommended
that you read this handbook thoroughly before beginning. For instance, correct speaker configuration and placement is a key
to getting the most out of your Receiver and making sure that all the elements of your system work in harmony.
To Next Page
Loading...
