Do you have a question about the JBL SUB 140P/230 and is the answer not in the manual?
Details the On/Standby LED, Crossover, Phase, Power-On Mode, and Level controls.
Explains Line-Level In (LFE/L/R) connectors, Power Switch, and Power Cord.
Guidance on positioning the subwoofer for best bass performance and integration.
Details connecting the subwoofer to a receiver with a dedicated LFE out.
Explains connecting the subwoofer to a receiver using preamp outputs.
Instructions for turning the subwoofer on, off, and using standby modes.
Setting the crossover frequency to blend subwoofer bass with satellite speakers.
Using the level control to set the subwoofer's output volume for optimal balance.
Setting the phase switch for optimal bass impact and clarity with satellite speakers.
Lists essential technical details of the JBL subwoofer model.
Detailed schematic of the amplifier circuit, showing component interconnections and signal paths.
Overview of the subwoofer's internal signal flow and component interactions.
Continuation of the amplifier schematic, detailing additional circuit sections and components.
Schematic diagram for the control board, illustrating its circuitry and components.
Schematic diagram for the stand-by power supply board, showing its circuitry.
Schematic diagram of the main power supply board, detailing its components and circuitry.