Need help?Do you have a question about the JBL SUB10 and is the answer not in the manual?
Details the initial steps for powering the subwoofer on.
Explains automatic power management based on signal detection.
Instructions for setting the volume for optimal bass blend.
Guidance on adjusting the phase switch for bass integration.
Details on setting the subwoofer's crossover frequency.
Procedure to verify basic operational functions of the subwoofer.
Using a sweep generator to test audio response and identify noises.
Steps to test the woofer's DC resistance and audio response.
Pinout and schematic for dual operational amplifiers.
Pinout and schematic for quad operational amplifier.
Pinout diagrams for 2N5401, 2SA1015, 2SC2412K.
Pinout diagrams for MOSFETs and TIP transistors.
Pinout diagrams for 2N5551, 2SC2235Y, 2SC1815.
Details the initial steps for powering the subwoofer on.
Explains automatic power management based on signal detection.
Instructions for setting the volume for optimal bass blend.
Guidance on adjusting the phase switch for bass integration.
Details on setting the subwoofer's crossover frequency.
Procedure to verify basic operational functions of the subwoofer.
Using a sweep generator to test audio response and identify noises.
Steps to test the woofer's DC resistance and audio response.
Pinout and schematic for dual operational amplifiers.
Pinout and schematic for quad operational amplifier.
Pinout diagrams for 2N5401, 2SA1015, 2SC2412K.
Pinout diagrams for MOSFETs and TIP transistors.
Pinout diagrams for 2N5551, 2SC2235Y, 2SC1815.
General| Type | Powered Subwoofer |
|---|---|
| Enclosure Type | Bass Reflex |
| Woofer Size | 10 inches |
| Inputs | Line-Level |
| Dimensions | 14.5 x 14.5 x 14.5 inches |
| Low Pass Crossover | 50Hz - 150Hz |
| Phase Switch | Yes |
To Next Page
