Need help?Do you have a question about the JBL Balboa SUB10 and is the answer not in the manual?
Audio Specifications| frequency response | 30Hz – 150Hz |
|---|---|
| amplifier output | 100 watts RMS |
| peak dynamic power | 225 watts |
| crossover frequency | 50Hz – 150Hz |
| driver size | 10" (250mm) |
Weight and Dimensions| dimensions | 20-1/4" x 14-1/16" x 15-13/16" (514mm x 357mm x 402mm) |
|---|---|
| weight | 35 lb (16kg) |
Instructions for handling and retaining packaging materials after receiving the subwoofer.
Guidance on positioning the subwoofer for optimal bass output and integration with satellite speakers.
Overview of the controls and connection ports located on the rear panel of the subwoofer.
Steps for connecting and turning on the subwoofer to its power source.
Explanation of the subwoofer's automatic standby mode and signal detection feature.
Guidance on setting the subwoofer's volume for a balanced audio experience.
Instructions for adjusting the phase switch to optimize bass output at the listening position.
How to set the crossover frequency for integrating the subwoofer with main speakers.
To Next Page
