JBL SUB150P User Manual

080-1475
1X
1X
1X
INCLUDED ITEMS
Your new JBL
®
SUB150P 300-watt powered subwoofer incorporates
a 10" (250mm) PolyPlas™ cone transducer and a built-in high-
performance 300-watt (RMS) amplifier that deliver the powerful,
dynamic and accurate low-frequency performance that makes your
film soundtracks and music come alive. And with line-level and LFE
inputs, adjustable crossover and phase controls and automatic turn
on/off, the SUB150P is also simple to connect and set up.
We’re confident that this JBL subwoofer will provide every note
of enjoyment that you expect – and that when you think about
purchasing additional audio equipment for your home, car or office,
you will once again choose JBL products.
This quick-start guide contains all the information you need to set
up, connect and adjust your new subwoofer. For more in-depth
information, go to our Web site: www.jbl.com.
THANK YOU FOR CHOOSING THIS JBL
®
PRODUCT
SUB150P
300-Watt, 10" (250mm) Powered Subwoofer
QUICK-START GUIDE
0242CSK - JBL SUB150P OM_v3.indd 1 29/09/10 9:57:48

JBL SUB150P Specifications

Transducer and Enclosure

low-frequency transducer	10" (250mm) PolyPlas cone (down-firing)
enclosure type	Ported (down-firing)

Amplifier

amplifier power (RMS)	300 watts
amplifier power (peak)	500 watts

Frequency and Audio Controls

frequency response	27Hz – 150Hz (–3dB)
audio controls	Volume level, crossover frequency, phase

Connections

connections	RCA line-level and LFE inputs

Power

power requirement (US)	120V, 60Hz
power requirement (EU)	220V – 230V, 50Hz/60Hz
power consumption (standby)	<1W (0.040A @ 230V)
power consumption (peak)	320W (1.8A @ 230V)

Weight and Dimensions

dimensions (W x H x D)	17-3/8" x 18-1/2" x 17-3/8" (441mm x 470mm x 441mm)
weight	39.7 lb (18.0kg)

Summary

Thank You For Choosing This JBL Product

Included Items

Lists items included with the subwoofer, such as cables and the unit itself.

Subwoofer Rear-Panel Controls and Connections

Phase Switch

Adjusts the subwoofer's piston action in relation to main speakers for optimal bass.

Input Mode Switch

Selects routing through subwoofer's crossover or bypass for LFE input.

Volume Control

Adjusts the subwoofer's output level relative to other speakers.

Crossover Control

Sets the highest frequency the subwoofer reproduces, integrating with satellites.

On/Standby LED

Indicates subwoofer status (green for on, red for standby).

Line-Level/LFE Input Connectors

Ports for connecting to receiver/processor outputs.

Power Switch

Turns the subwoofer on/off, activates auto-on/standby.

Power Cord Connector

Connects the IEC power cord to the subwoofer.

Placing the Subwoofer

Connecting the Subwoofer

Connection to Dedicated Subwoofer Output

Connects to receiver LFE OUT using LFE input and 'LFE' mode.

Connection to Preamp Outputs

Connects to receiver preamp outputs using Line In and 'Normal' mode.

Operating the Subwoofer

Turning the Subwoofer On and Off

Explains power switch operation and auto-on/standby.

Subwoofer Adjustments: Phase

Explains phase adjustment for optimal bass impact.

Subwoofer Adjustments: Crossover Control

Details adjusting the low-pass filter for smooth bass transition.

Subwoofer Adjustments: Volume

Guides setting subwoofer volume relative to other speakers.

Specifications