• Enter Customer Information
Figure 12:
Customer Information Window
The information you provide here performs two important functions. It attaches a customer and dealer name to the
test data that is saved by DACS4. This data is later used to create the Synthesis Calibration Certificate. Please take
care to enter the customer’s name exactly as he or she prefers. This is what will be printed on the certificate.
The information in section two is used to initialize the DACS4 program. Use care when selecting inputs. An incorrect
entry may go completely unnoticed until it is realized that the system just doesn’t sound right.
Use the [Tab] key to advance from one field to the next. If you wish to return to a previous field, press [Alt]+[Tab].
You must make an entry in all fields to run the program.
37
4.5
DACS4 OPERATION
To Next Page
Loading...
Need help?
General
