EasyManua.ls Logo

JBL VT4886 User Manual

JBL VT4886
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
06-11
JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.
JBL VT4886
REV K
PACKAGE
Technical Manual
JBL VT4886
SPECIFICATIONS
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
Bandpass Nominal 12 Ohms (drivers wired in series-parallel,
Impedance: passive network)
• System Input Power 900W Continuous, 3600W Peak
Rating: (AES / 2 hour)
700W Continuous, 2800W Peak
(100 hour)
Frequency Response: 75 Hz- 18 kHz (±3 dB)
Frequency Range: 65 Hz- 20 kHz (-10 dB)
Maximum Peak Output: 136 dB SPL, 1 Meter
Bandpass Sensitivity: 101 dB, 1 Watt @ 1 Meter
Recommended 1400-1800W at 12 Ohms (single encl.)
Amplification: 2800-3600W at 6 Ohms (two enclosures
in parallel)
4200-5400W at 4 Ohms (three enclo-
sures in parallel)
5600-7200W at 3 Ohms (four enclosures
in parallel)
• Recommended Signal Crown
®
I-Tech HD, Crown I-Tech, dbx
®
Processing: DrivePack
®
4800, BSS Audio
™ FDS-366T
Omnidrive™, BSS Audio Soundweb
London
• Crossover Frequency: 375 Hz and 1.6 kHz
SYSTEMS COMPONENTS:
Cabinet: Enclosure Assembly C4886
• Grille: 442452-001
• Low Frequency (2) 2166H, 165 mm (6.5 in) dia, 50 mm
Transducer: (2 in) Dual Coil, Dual Magnet Neodymium
Differential Drive
®
, Direct Cooled
DC Resistance: 5.0 ohms ± 10%
Mid Frequency (4) 2103G, 101 mm (2.5 in) with 25.4
Transducer: mm (1 in) dia. voice coil and Neodymium
magnet
SYSTEMS COMPONENTS:
(CONT’D)
DC Resistance: 2.2 ohms ± 10%
High Frequency (2) 2414H, 25 mm (1 in) exit com-
Transducer: pression driver, Neodymium magnet,
38 mm (1 in) voice coil
DC Resistance: 3.60 ohms ± 0.2 ohm
AURAL SWEEP TEST SPECIFICATIONS:
A. System Aural Sweep Test: 15V, 50 Hz to 20 kHz
B. LF Woofer Sweep Test: 10V, 10 Hz to 300 Hz
C. MF Woofer Sweep Test: 4V, 100 Hz to 1000 Hz
D. HF Driver Sweep Test: 0.75V, 500 Hz to 1.5 kHz
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions: 197 x 579 x 261 mm D
(7.8 x 22.8 x 10.3 in. D)
• Net Weight: 34 lb (15.4 kg)
• Shipping Weight: 38.5 lb (17.5 kg)
WARRANTY INFORMATION:
• Refer to Warranty Statement packed with each product.
Warranty 59660
Specification Sheet
443674-001
JBL
VT4886-AF
Carton
445033-001
Corner Protector, (4)
445034-001
PKG, Microfoam (6)
49790P
20” x 18” Sheets
Carton
445209-001
Filler (2)
445208-001
PKG, Microfoam (2)
49790P
910-00035-01 (1)
Ferro fluid vial w/
blotter paper and
instruction sheet
910-00035-02 (12)
Ferro fluid vials w/
blotter paper and
instruction sheet
Question and Answer IconNeed help?

Do you have a question about the JBL VT4886 and is the answer not in the manual?

JBL VT4886 Specifications

General IconGeneral
Impedance8 ohms
High Frequency Driver1 x 1.5" (38mm) neodymium compression driver
EnclosureTrapezoidal
Input Connectors2 x Neutrik NL4
Enclosure Materialplywood

Summary

JBL VT4886 Specifications

Acoustic and Electrical Specifications

Details acoustic performance, electrical ratings, frequency response, sensitivity, and power handling.

Systems Components

Lists primary components like drivers, cabinet, grille, and network.

Physical Specifications

Provides physical dimensions, enclosure details, net, and shipping weight.