03 - Attachments and Options
09 - Lift Arm Quickhitch
09 - Electronic Quickhitch
03 - 13 9813/6750-1 03 - 13
3. Drive the machine slowly forward. Stop when
the quickhitch plate just touches the shovel/
attachment.
4. Visually verify that the quickhitch actuator is fully
extended prior to engaging the hitch plate into the
attachment.
5. Raise the lift arm and engage the quickhitch plate
in the lips on the shovel/attachment. Stop the
movement as soon as the plate is engaged.
6. Move the lift arm control lever to roll back the
shovel/ attachment slightly.
7. Once the quickhitch plate is engaged press and
hold the lock switch.
8. Ensure the actuator is fully retracted and visually
inspect that locking pins are engaged into the
attachment.
To Next Page
Loading...
