01 - Machine
03 - Safety
27 - Maintenance Positions
01 - 15 9813/6750-1 01 - 15
8. Unfold the cab/canopy maintenance strut from
the stowed position. Position the cab/canopy
maintenance strut to support the cab/canopy.
9. Replace the locking pin in the support position.
Figure 9.
Figure 10.
Figure 11. Stowed Position
B Locking pin
D Cab/canopy maintenance strut
Figure 12. Support Position
B Locking pin
D Cab/canopy maintenance strut
Operation Position
1. Make sure the area between the cab/canopy and
the chassis is clear before you lower the cab/
canopy.
2. Fold the cab/canopy maintenance strut back into
the stowed position and fix in place with pin from
a safe position
3. Lower the cab/canopy by slowly pushing on the
front steel tubes of the cab/canopy frame. Do
To Next Page
Loading...
Need help?
General
