About the Product
Product and Component Identification
8 9831/3750-3 8
Product and Component Identification
Machine
Your machine has an identification plate. The PIN (Product Identification Number), weight, engine power, year
of manufacture and serial number of the machine are shown on the identification plate.
Figure 4.
The machine model and build specification are indicated by the PIN. The PIN has 17 digits and must be read
from left to right.
Table 1. Typical PIN
JCB A220G H H 1234567
Table 2. Explanation of the PIN
Digit Description
1 to 3 World manufacturer identification. For example, JCB = UK Build.
4 to 8 Machine type and model.
9 Random check letter. The check letter is used to verify the authenticity of a
machine's PIN.
10 Year of manufacture. H = 2017, J = 2018
11 to 17 Machine serial number.
Engine
The engine data labels are attached to the engine as shown.
To Next Page
Loading...
Need help?
General
