Section 1 - General Information
Introduction
Identifying your Machine
1 - 4 1 - 4
9803/4180-08
Typical Product Identification Number
T033160-1.
Fig 3.
1 World Manufacturer Identification (3 Digits)
2 Model Number (3 Digits)
3 Loader End Type (1 Digit)
4 Designation (1 Digit)
5 Check Letter (1 Digit)
The Check Letter is used to verify the authenticity of
the machine’s PIN.
6 Year of Manufacture (1 Digit)
7 Machine Serial Number (7 Digits)
Each machine has a unique serial number.
Note: On later models, the year of manufacture digit was
removed and the machine serial number was increased to
8 digits.
O = HT Loader End
Z = ZX Loader End
S = Farmmaster
O = None Farmmaster
I = India
7 = 2007 A = 2010
8 = 2008 B = 2011
9 = 2009 C = 2012
Find manuals at https://best-manuals.com
To Next Page
Loading...
