Need help?Do you have a question about the jcb 506-36 and is the answer not in the manual?
General| Operating Weight | 6, 100 kg |
|---|---|
| Engine power | 55 kW (74 hp) |
| Bucket capacity | 0.6 m³ |
| Travel speed | 33 km/h |
| Max. Reach horizontal | 2, 25 m |
| Max. Reach at Ground Level | 2.25 m |
Highlights that machinery is hazardous and requires careful operation and maintenance for the safety of the operator and others.
Explains the meaning of signal words (DANGER, WARNING, CAUTION, Notice) and the safety alert system symbol used in the manual.
Covers essential safety practices including training, care, alertness, appropriate clothing, avoiding alcohol/drugs, and handling mobile phones.
Advises against loose clothing and jewelry, stressing the importance of wearing appropriate PPE as per job conditions.
Defines the danger zone around the machine and emphasizes keeping all persons out of this area during operation and maintenance.
Focuses on identifying the machine and its various components using the identification plate and PIN.
Explains the purpose and location of the machine's identification plate, which displays serial numbers and build specifications.
Warns about the dangers of operating with a damaged ROPS/FOPS and explains the FOPS impact protection standard.
Explains the purpose of safety labels placed around the machine and the importance of keeping them clean and readable.
Warns about hazards indicated by safety labels and stresses the need to understand their meaning for safe operation.
Introduces the section for identifying specific safety labels and their corresponding part numbers for ordering replacements.
Provides a detailed table listing safety labels, their part numbers, descriptions, and quantities.
To Next Page
