To Next PageTo Next Page
Need help?Do you have a question about the jcb 210S and is the answer not in the manual?
General| Brand | jcb |
|---|---|
| Model | 210S |
| Category | Front End Loaders |
| Language | English |
Table of torque settings for UNF Grade 'S' Bolts and Metric Grade 8.8 Bolts.
Explanation of signal words (DANGER, WARNING, CAUTION) used for safety notices.
General safety precautions for operating and maintaining the JCB machine.
Specific safety warnings related to machine condition, controls, limits, engine, and entry/exit.
Safety advice for performing maintenance, including repairs, welding, and handling batteries.
Precautions for handling, storing, and disposing of lubricants, including hygiene advice.
Maintenance and lubrication schedules based on machine running hours for various systems.
Procedure for installing and removing the loader arm safety strut for safe maintenance.
Instructions for checking engine oil level and changing the oil and filter.
Procedures for checking and changing the oil and filter in the Syncro Shuttle transmission.
Procedures for parking brake adjustment and checking foot brake fluid level.
Safety checks for the Roll Over Protection Structure (ROPS) and Falling Objects Protection Structure (FOPS).
Identification and rating of fuses and relays used in the electrical system.
Procedures for removal, replacement, and adjustment of the Syncro Shuttle Gearbox.
Troubleshooting guide for common brake system faults.
Procedure for checking brake piston seal leakage and bleeding the brake system.
Procedure for testing, adjusting, and renewing brake pads for the parking brake.
Troubleshooting guide for common steering system faults.
Procedures for initial system bleeding, pressure testing, and re-aligning road wheels.
