To Next PageTo Next Page
Need help?Do you have a question about the jcb 2CX and is the answer not in the manual?
General| Brand | jcb |
|---|---|
| Model | 2CX |
| Category | Front End Loaders |
| Language | English |
Lists tools used within the General Information section.
Explains how to identify machine and unit serial numbers using identification plates.
Provides torque settings for UNF Grade 'S' and Metric Grade 8.8 bolts.
Lists specialized tools for body and framework maintenance.
Lists tools for glass removal, installation, and related sealant work.
Includes tools for electrical system checks and repairs like AVO Test Kit and Battery Tester.
Details fuse and relay identification, circuits, and ratings for the machine's electrical system.
Covers battery warning symbols, first aid for electrolyte, and testing procedures.
Lists tools for hydraulic system testing and maintenance.
Describes the Hydraulic Circuit Pressure Test Kit for system testing.
Explains the basic principles of the gear-type hydraulic pump operation.
Outlines common hydraulic system faults, probable causes, and recommended actions.
Lists specialized tools for transmission and axle maintenance.
Covers technical data, basic operation, and systems description of the Syncro Shuttle gearbox.
Details technical specifications for the front axle (SD55).
Covers removal, replacement, dismantling, and assembly of the rear axle.
Lists tools for engine cylinder bore maintenance.
Provides guidelines on safe handling, storage, and disposal of lubricants.
Explains coolant pressure, normal temperature, and warning light operation.
Details types of fuel, fuel standards, and low temperature fuel considerations.
Provides technical specifications for 67 BHP and 75 BHP engines.
Explains signal words (DANGER, WARNING, CAUTION) used for safety notices in the manual.
Outlines general safety practices for operating and working on the machine.
Covers warnings and precautions related to machine condition, controls, limits, and operation.
Details safety precautions for performing maintenance, repairs, and modifications.
Details essential service requirements and recommendations for machine maintenance.
Provides guidelines on safe handling, storage, and disposal of lubricants.
Lists scheduled maintenance tasks based on operating hours and calendar equivalents.
Details daily greasing points for various machine components.
Describes the type, actuation, and location of service brakes.
Details the type, actuation, and location of the parking brake.
Explains the description and basic operation of the compensating master cylinders.
Lists common brake system faults, probable causes, and troubleshooting steps.
Lists specialized tools for steering system maintenance.
Provides technical specifications for the steer unit and priority valve.
Explains the steer system schematics and hydraulic operation.
Outlines common steering system faults, probable causes, and troubleshooting steps.
